Mannady Quarterly TDS Filing — Chennai North

Section 192 of the Income-tax Act 1961 casts an obligation on every person responsible for paying any income chargeable under the head Salaries to deduct income-tax at the average rate of tax computed on the basis of rates in force for the financial year. It is to be noted that the deduction is to be effected at the time of payment and not on accrual. Sub-section (2B) permits the employee to furnish particulars of other income for inclusion. The aggregated tax so deducted is reportable in Form 24Q on a quarterly basis.

Section 194A applies to any person, not being an individual or HUF below the audit threshold under Section 44AB, paying interest other than interest on securities to a resident. Sub-section (1) requires deduction at rates in force at the time of credit or payment, whichever is earlier. Sub-section (3) lists thresholds — currently forty thousand rupees per payee per financial year for banks and ten thousand rupees in other cases, with fifty thousand rupees for senior citizens. The deductions are aggregated in Form 26Q.

Sub-section (1) of Section 194C provides that any person responsible for paying a sum to a resident contractor for carrying out any work, including supply of labour, in pursuance of a contract is required to deduct tax at one per cent where the payee is an individual or HUF and at two per cent in other cases. Sub-section (5) sets the thresholds at thirty thousand rupees per single payment and one lakh rupees in the aggregate for a financial year. The deductions are reportable in Form 26Q.

Section 194J governs deduction of tax at source on payments for professional services, technical services, royalty, non-compete fees and remuneration to directors. Sub-section (1) prescribes deduction at ten per cent on professional services and two per cent on fees for technical services where the payer is not an individual or HUF below the audit threshold. The threshold is thirty thousand rupees in the aggregate per financial year per service category. Form 26Q reports these deductions.

Section 195 requires any person responsible for paying to a non-resident, not being a company, or to a foreign company any interest or any other sum chargeable under the provisions of the Act, to deduct tax at the rates in force. Sub-section (1) operates at the time of credit or payment, whichever is earlier. Sub-section (2) permits the payer to apply to the Assessing Officer for determination of the appropriate portion chargeable to tax. The deductions populate Form 27Q quarterly.

Sub-section (1) of Section 200 obliges any person deducting any sum under the foregoing provisions of Chapter XVII-B to pay the sum so deducted to the credit of the Central Government in the prescribed manner. Sub-section (3) further requires that the deductor prepare and furnish a quarterly statement of deductions in such form and verified in such manner as may be prescribed. Rule 31A operationalises this requirement and prescribes Forms 24Q, 26Q, 27Q and 27EQ.

What is TDS quarterly filing and when is it required

TAN as the unique identifier

Every deductor and collector requires a Tax Deduction Account Number under Section 203A obtained through Form 49B online via the Protean eGov-NSDL or UTIITSL portal. The ten-character TAN identifies the deductor across all four quarterly statements, all challans deposited under ITNS-281, all certificates issued in Forms 16, 16A, 16B, 16C, 16D, 16E and 27D, and the entire TRACES correspondence trail. Failure to obtain TAN before deduction does not relieve the deduction obligation but adds a Section 272BB penalty of ₹10,000. A single deductor may operate multiple TANs across branches, but the consolidated employer-level Form 24Q Annexure-II must reflect the salary breakup against the TAN under which Section 192 deductions are actually deposited. Branch-level deduction with consolidated reporting under a single TAN is permissible only where authorised under sub-rule (1A) of Rule 30, subject to the deductor selecting the consolidation option at the TAN registration stage.

OECD comparator on withholding architectures

The OECD Forum on Tax Administration Pay-As-You-Earn study identifies three withholding-architecture archetypes — cumulative annualised withholding (United Kingdom PAYE), per-period rate-table withholding (United States Federal Income Tax Withholding), and average-rate annualised withholding (Indian Section 192). The Indian Section 192 model under sub-section (3) requires the employer to estimate the employee's total annual salary, compute tax under the applicable regime — old or new under Section 115BAC — and apportion the resulting liability across remaining pay periods. This places India closer to the United Kingdom cumulative model than to the United States table-based model. The OECD International Compliance Assurance Programme recognises the average-rate model as administratively efficient where the employer has end-of-year reconciliation capacity, which Section 192 enables through Form 24Q Annexure-II at Q4. The non-salary withholding architecture under Section 194 series and Section 195 follows a transaction-rate model closer to the United States Form 1042 framework for payments to foreign persons, again reconciled quarterly through Form 26Q and Form 27Q.

Statutory architecture of Chapter XVII-B

Tax Deduction at Source in India is governed by Chapter XVII-B of the Income-tax Act 1961, spanning Sections 192 to 196D, and is supplemented by Tax Collected at Source under Section 206C. The substantive provisions impose a withholding obligation on the payer for specified categories of payment, while the procedural framework under Section 200(3) read with Rule 31A of the Income-tax Rules 1962 prescribes quarterly statements consolidating all deductions made during the quarter. The constitutional basis traces to Entry 82 of the Union List read with Article 246, with the withholding mechanism characterised by the Supreme Court in CIT v Eli Lilly and Company as a vicarious obligation discharged on behalf of the deductee. Four return forms cover the universe — Form 24Q for salary deductions under Section 192, Form 26Q for non-salary resident payments, Form 27Q for non-resident payments under Section 195 and allied provisions, and Form 27EQ for tax collected at source under Section 206C. The framework dates structurally to the 2003 amendments through the Finance Act 2002 which moved India from annual Form 26 reporting to a quarterly statement architecture aligned with OECD Forum on Tax Administration recommendations on real-time withholding compliance.

Form 24Q Q4 Annexure-II salary breakup

Chapter VI-A deductions and Section 10 exemptions

Annexure-II carries dedicated columns for Section 10 exemption components — house-rent allowance under Section 10(13A), leave-travel concession under Section 10(5), gratuity under Section 10(10), leave encashment under Section 10(10AA), commuted pension under Section 10(10A), voluntary retirement compensation under Section 10(10C), and other exemptions — and for Chapter VI-A deductions including Section 80C contributions to provident funds, life insurance premium, ELSS and notified instruments, Section 80CCD contributions to National Pension System, Section 80D health-insurance premium, Section 80E education-loan interest, Section 80G donations and Section 80TTA interest deduction. The deductor must capture these from the employee declarations under Form 12BB filed at the start of the financial year and updated through the year, with documentary evidence preserved for the statutory retention period of seven years from the end of the relevant assessment year under Section 200(2A) and Rule 31A(5).

Regime declaration field

Annexure-II includes a dedicated field for the regime under which the salary is taxed — the new regime under Section 115BAC(1A) is the default, with the old regime applying only where the employee files Form 10-IEA exercise. The regime field has downstream consequences — under the new regime, the Chapter VI-A columns other than Section 80CCD(2) and Section 80JJAA are nil, the Section 10 exemption columns other than agricultural income are nil, and the standard deduction under Section 16(ia) at ₹50,000 is available (enhanced to ₹75,000 under the new regime from assessment year 2024-25 by the Finance Act 2023). The employee's pre-filled return at the deductee end reflects the regime declared in Annexure-II — a mid-year regime switch by the employee at the return-filing stage creates a reconciliation gap that the deductee must resolve through Schedule TR or by writing the correct allowable deduction position into the return manually.

Common reconciliation defects

Quarterly review of Annexure-II reveals recurring defect patterns — under-reporting of perquisite values where the payroll system does not load ESOP exercise data, mis-mapping of leave-encashment under Section 10(10AA) where the deductor classifies a private-sector employee under the government-employee exemption limb, omission of the Section 192A withholding on premature provident-fund withdrawals which require separate Form 26Q reporting under Section 192A rather than aggregation into the Form 24Q salary line, and aggregation of relocation reimbursement actuals into the gross salary rather than treating them as non-taxable reimbursements under CBDT Circular 5/2010 paragraph 5.3.4. Each defect propagates to the Form 16 Part B issued to the employee and to the pre-filled return data — early reconciliation at FVU validation stage avoids downstream Section 143(1)(a) notices at the employee end.

Form 26Q vendor TDS framework

Section-code architecture

Form 26Q consolidates resident-payee non-salary deductions under one quarterly statement organised by section-code in column nine of the deductee row. Section codes 94A for Section 194A interest other than securities, 94B for Section 194B winnings, 94C for Section 194C contractors, 94D for Section 194D insurance commission, 94E for Section 194E sportsmen, 94EE for Section 194EE NSS, 94F for Section 194F mutual fund repurchase, 94G for Section 194G commission on lottery, 94H for Section 194H commission and brokerage, 94I-a for Section 194-I rent on plant and machinery, 94I-b for Section 194-I rent on land or building, 94J for Section 194J professional fees, 94K for Section 194K mutual fund income, 94LA for Section 194LA compensation on acquisition, 94O for Section 194O e-commerce payments, 94Q for Section 194Q goods procurement, and 94R for Section 194R benefits or perquisites. Each section code triggers section-specific rate and threshold validation in the FVU utility before upload acceptance.

Deductee row population and PAN validation

Each deductee row in Form 26Q carries the deductee PAN, name, date of payment or credit, amount paid or credited, amount of tax deducted, surcharge, health and education cess, total tax deposited, challan-identification-number reference linking to the challan deposited under ITNS-281, certificate number for any Section 197 lower-deduction certificate applied, and remarks for any special characterisation. PAN validation occurs at two stages — at FVU validation through PAN-format-check (ten characters, fourth character status code, fifth character first letter of surname), and at TRACES portal processing through PAN-active-status check against the income-tax department PAN master. Invalid or inactive PAN rows trigger Section 206AA higher-rate withholding at twenty per cent or rate-in-force whichever is higher, and the deductor must re-upload corrected statements once PAN is validated.

Section 197 lower-deduction certificates

Section 197 read with Rule 28AA permits the deductee to apply for a certificate authorising deduction at a lower rate or nil rate. The application is filed in Form 13 through the TRACES portal by the deductee, with the Assessing Officer issuing a certificate addressed to the deductor specifying the rate, the period of validity, and the maximum amount on which the lower rate applies. The certificate number must be populated in the certificate-number column of the deductee row in Form 26Q for the lower rate to be accepted at FVU validation. Where the certificate-validity period spans multiple quarters, the same certificate number is repeated across quarterly statements. Where the maximum-amount cap is reached during the validity period, subsequent payments revert to the rate-in-force without certificate reliance. The post-2018 fully-online Form 13 workflow under CBDT Notification 8/2018 has eliminated the historical physical-certificate exchange friction.

Form 27Q non-resident reporting

Pillar Two and BEPS reporting interaction

The OECD Pillar Two Global Anti-Base Erosion model rules under the GloBE framework introduce a fifteen per cent minimum effective tax rate on multinational enterprise groups with consolidated revenue above EUR 750 million. India has not yet enacted Pillar Two domestic implementation through the Income-tax Act, although the Finance Ministry has signalled adoption in successive Budget consultations. Where adopted, Pillar Two will create a top-up tax interaction with Section 195 — withholding paid in India will reduce the GloBE-effective-tax-rate computation for the deductee jurisdiction subject to the Substance-Based Income Exclusion rules. The OECD Inclusive Framework Implementation Handbook 2024 and the Administrative Guidance on Pillar Two GloBE Rules issued by the OECD Centre for Tax Policy and Administration provide the operational framework for cross-border withholding reconciliation. The BEPS Action 5 country-by-country reporting under Section 286 of the Income-tax Act feeds parallel-stream data into the same reconciliation analysis.

Annexure-Less data fields

Form 27Q for non-resident deductee reporting under Section 195 and allied provisions carries additional Annexure-Less data fields not present in Form 26Q — country of residence of the deductee, email address of the deductee, contact details, address line one and address line two, Permanent Account Number where available or alternate identifier under Rule 37BC, Tax Identification Number in the country of residence, and Tax Residency Certificate reference. The Rule 37BC alternative-identifier framework introduced for non-residents not holding PAN allows treaty-rate access without PAN where the prescribed alternate details are furnished — country TIN, address, and TRC. Where the alternate-identifier framework is not satisfied, Section 206AA higher-rate of twenty per cent or rate-in-force whichever is higher applies notwithstanding the treaty rate, subject to the Section 206AA(7) carve-out for interest on long-term infrastructure bonds and the Bharti Airtel and several Tribunal authorities reading treaty-rate primacy into Section 206AA.

Country code and treaty-article tagging

Each deductee row in Form 27Q carries a country-code field populated from the ISO-3166 two-character country code list mapped to the Indian DTAA treaty network. The country code drives the FVU validation of the applicable withholding-rate ceiling — payments to United States residents under treaty article 12 royalty are validated against the fifteen per cent ceiling, payments to Singapore residents under the limitation-of-benefits article 24 are validated against the ten per cent ceiling subject to the LOB satisfaction documented separately. The treaty-article tagging in the remarks field provides downstream audit-trail support — the Assessing Officer at the deductor side and at the deductee side both rely on the remarks field for treaty-position verification during scrutiny under Section 143(3). Errors in the country code are a common cause of Form 27Q rejection at the FVU validation stage.

Q3 Form 27Q non-resident vendor payment routed via Section 90 DTAA rate

Section 194Q-Section 206C(1H) overlap — both deductor and collector applied tax

Quarter Q1 challan paid under wrong major head — 0021 instead of 0020

Late challan deposit triggered Section 201(1A) interest; Section 271C dropped

Other Services in Mannady, Chennai

What Mannady Clients Say