Process Audit delivery for residential and retail firms across Nolambur Phase 3 — and a zero-penalty filing record
Nolambur Phase 3 residential and retail units around Nolambur Phase 3 Park — qualified review, a 7-year workpaper archive and fixed fees from day one. Call 9566-068-468.
Vendor risk assessment uses a tiering model — strategic, critical, important, transactional — with proportional due diligence. For outsourced business processes, we assess the vendor's SOC 1 / SOC 2 / ISAE 3402 reports, business-continuity plan, exit clauses, sub-contracting controls and data-protection compliance under the DPDP Act 2023. SA 402 "Audit Considerations Relating to an Entity Using a Service Organisation" governs the auditor's reliance on the service organisation's controls.
Fixed fees · Zero hidden charges · Call 9566-068-468 for a custom quote.
Swipe to see all plans
Prices exclude GST. For enterprise pricing, call 9566-068-468.
Expert Process Audit in Nolambur Phase 3 — qualified professionals, 15+ years experience, zero-penalty track record.
Process maps, control matrices, CAAT scripts, findings registers and management responses retained for 7 years on access-controlled storage. Never shared externally or used for cross-marketing. ICAI Code of Ethics confidentiality applies.
Findings are not just reported — they are tracked through a closure ledger reviewed quarterly with the Audit Committee. A 6-month follow-up audit (SIA 390 prior-engagement monitoring) verifies that remediation has actually held in operation.
Every cycle is benchmarked against the 5 components — Control Environment, Risk Assessment, Control Activities, Information & Communication, Monitoring — and the 17 underlying principles. Findings explicitly cite the principle gap, not just the symptom.
Engagement planning under SIA 310, evidence under SIA 320, documentation under SIA 330, communication under SIA 360, prior-engagement monitoring under SIA 390 and reporting under SIA 740 — every step of a FilingPro engagement aligns with the ICAI standards mandatory from 1 April 2024.
SA 315 (Revised) drives the planning phase — entity understanding, IT environment, control mapping and inherent-risk assessment at financial-statement and assertion level. Audit effort is targeted at high-risk processes, not spread thinly across everything.
Process audit findings are framed within DMAIC — baseline measurement, root-cause analysis (5-Why, Fishbone, Pareto), recommendation, pilot and control-plan handover. Nolambur Phase 3 clients receive efficiency improvement, not just compliance reporting.
Every Business Process Audit engagement delivers measurable, guaranteed outcomes — expert professionals, on time, every time.
Why this matters here — Nolambur Phase 3 businesses operate where the cluster of residential, retail, coaching businesses that defines Nolambur Phase 3's commercial fabric, and served by short connections to Nolambur and Nolambur Phase 1 and onward to central Chennai.
Share documents via WhatsApp to 9566-068-468. No office visit required for Nolambur Phase 3 clients.
Miss any of these and the next consequence kicks in automatically.
Deadlines in this neighbourhood — Nolambur Phase 3 businesses operate where the business activity radiating outward from Nolambur Phase 3 Park and nearby commercial pockets.
Deadline pressure points we see in Nolambur Phase 3: On the ground in Nolambur Phase 3, for the professional and salaried population of Nolambur Phase 3 navigating personal-tax and home-office GST.
Statutory form prescribed for Business Process Audit engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Process Audit engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Process Audit engagements; carries the information set required for filing or submission to the prescribed authority.
Every claim on this page can be traced back to a section or rule below.
COSO framework and SA 315 is the operative provision for business process audit in this engagement. SOP review process gap analysis cost-saving identification operational efficiency improvement reporting The taxpayer should ensure the procedural conditions under this section are met before any filing or submission. Failure to comply attracts the consequences separately prescribed under the penalty and interest provisions of the same Act.
The 600xx geo-zone covering Nolambur Phase 3 groups several locality clusters under common administration, keeping documentation expectations predictable. Every Nolambur Phase 3 engagement we open begins with the basics: PIN 600095, the Ambattur Division, and the coordinates 13.0844, 80.1647 that anchor the locality. Businesses registered in Nolambur Phase 3 share the Chennai West jurisdiction, and their statutory matters route through the same Ambattur Division each time. We keep a cycle-by-cycle record of how the Ambattur Division of the Chennai West handles Nolambur Phase 3 filings and approvals.
The businesses clustered around Nolambur Phase 3 Park in Nolambur Phase 3 drive the bulk of the Business Process Audit workload we see each cycle. Nolambur Phase 3 sustains a medium flow of commerce for a residential phase with newer development locality, and that flow is the raw material for the Process Audit files we close here. The residential phase with newer development mix of Nolambur Phase 3 shapes what lands in our workpapers — a blend of small trade activity and the commercial pulse around Nolambur Phase 3 Park. Working in Nolambur Phase 3 brings a logistical edge: proximity to Nolambur Phase 3 Park and the Nolambur Phase 3 Bus Stop corridor keeps physical document handling fast.
residential units around Nolambur Phase 3 share recurring Process Audit patterns — input-credit timing, vendor reconciliation, and sector-specific documentation. Mixed residential activity across Nolambur Phase 3 means our Process Audit team keeps sector playbooks ready rather than improvising per client. The business mix in Nolambur Phase 3 centres on residential, and that sector carries its own Business Process Audit quirks we plan for in advance. For a residential business in Nolambur Phase 3, the Business Process Audit scope is rarely generic; we tailor the checklist to how that sector actually transacts.
The Nolambur Phase 3 Business Process Audit workflow is documented end-to-end: WhatsApp document intake, a working file, qualified review, and a filed acknowledgement back to you. Document intake for Nolambur Phase 3 clients runs over WhatsApp, so there is no office visit and no paper shuffle for a Business Process Audit engagement. Every Process Audit file we open for Nolambur Phase 3 is reconciled, reviewed by a qualified practitioner, and archived for seven years. We keep a repeatable Process Audit checklist for Nolambur Phase 3 so nothing in the cycle is improvised or missed.
Business Process Audit clients in Maduravoyal are handled by the same practitioners who run our Nolambur Phase 3 desk. Businesses straddling Nolambur Phase 3 and Maduravoyal get a single Process Audit point of contact rather than two. Coverage from Nolambur Phase 3 naturally extends to Maduravoyal, so group entities across the area share one Business Process Audit workflow. We treat Nolambur Phase 3 and Maduravoyal as one catchment for Business Process Audit, which keeps documentation and turnaround consistent.
Sector signals in Nolambur Phase 3 — seasonal small trade swings and peak-period volumes — shape how we schedule Process Audit work. Patterns we track for Nolambur Phase 3 include small trade documentation gaps, timing mismatches, and the questions the Ambattur Division tends to raise. Each engagement in Nolambur Phase 3 adds to a record of what the Chennai West jurisdiction expects, sharpening the next Process Audit file. Recurring gaps in Nolambur Phase 3 small trade records are the first thing our Business Process Audit review closes out.
First-time Business Process Audit for a Nolambur Phase 3 business is where getting the basics right saves years of cleanup later. New residential ventures in Nolambur Phase 3 lean on us to stand up Business Process Audit correctly before the first deadline rather than after a notice. A startup setting up near Nolambur Bus Stop in Nolambur Phase 3 gets a Process Audit foundation built for the Ambattur Division from day one. For a new business incorporating in Nolambur Phase 3 or shifting its principal place of business here, Business Process Audit setup is one of the first things to get right.
Independent process audit under COSO 2013 and ICAI SIA 110-740 — O2C, P2P, H2R, inventory, fixed asset and treasury cycles mapped, tested and reported with quantified ₹ savings for Nolambur Phase 3 businesses.
A dedicated process audit consultant in Nolambur Phase 3 delivers BPMN 2.0 process maps, RACI matrix review, SOD conflict analysis, CAAT 100% population testing and CMMI Level 1-5 maturity scoring.
Director's Responsibility Statement under Section 134(5)(e) supported by documented ICFR design assessment, walkthroughs, test of operating effectiveness and significant-deficiency reporting under SA 265.
For Nolambur Phase 3 listed entities and significant data fiduciaries — BRSR Core (SEBI Top-1000) data-collection process audit, CERT-In Section 70B incident-response audit and DPDP Act 2023 data-protection audit.
Process audit walks through the vigil-mechanism workflow under Section 177(9) of the Companies Act 2013 read with SEBI LODR Regulation 22, tests live complaint files for triage, investigation and disposition discipline, and rebuilds the documentation trail. The output supports the audit committee's annual vigil-mechanism affirmation.
Under Section 177(4)(iv) of the Companies Act 2013 the audit committee evaluates internal financial controls and risk management systems. Process audit findings are formally tabled at the quarterly audit committee meeting, with remediation tracking and management response recorded in the minutes for board ratification under Section 117.
A business process audit examines the design and operating effectiveness of business processes such as procure-to-pay, order-to-cash and record-to-report. It surfaces process gaps, segregation-of-duties weaknesses and automated control failures, anchored on the COSO 2013 framework and SA 315 walkthrough discipline.
The Committee of Sponsoring Organisations of the Treadway Commission framework provides five integrated components: control environment, risk assessment, control activities, information and communication, and monitoring activities. The seventeen principles thereunder operationalise the framework for each business process at design and operating-effectiveness assessment.
Standard on Auditing 315 issued by the Institute of Chartered Accountants of India directs the auditor to identify and assess risks of material misstatement through understanding the entity and its environment. Paragraph A77 mandates walkthrough tests of process flows, used as the field anchor in any business process audit.
Process maps and SOP documents are gathered, the process owner is interviewed, SA 315 walkthrough tests are performed on sample transactions, design and operating effectiveness is assessed against the COSO 2013 framework, and a gap log with remediation roadmap is presented to the audit committee for closure within ninety days.
What Nolambur Phase 3 clients want to know before signing: On the ground in Nolambur Phase 3, around the Nolambur Phase 3 Park catchment of Nolambur Phase 3.
Reading this guide locally — Nolambur Phase 3 businesses operate where in the residential phase with newer development micro-market of Nolambur Phase 3.
An SME typically commissions a process audit at one of five trigger points: (a) onboarding a new ERP or core system, where the migration is a natural moment to redesign and document processes; (b) preparing for external funding (PE, debt, IPO) where investors expect documented internal controls; (c) after a fraud or material misstatement incident, where the board demands a root-cause and remediation review; (d) ahead of a statutory audit where the auditor has flagged IFC inadequacies in the prior year; (e) on a periodic-improvement basis aligned with ISO 9001:2015 clause 9.2 internal audit and clause 10.2 continual improvement. The OECD Principles of Corporate Governance (2023 revision) treat documented internal-control systems as a board-responsibility item; a process audit is the operational expression of that responsibility at the SME scale.
Process audit, statutory financial audit and forensic audit differ in objective, evidence standard and reporting outcome. Statutory financial audit under Section 143 Companies Act and the ICAI SA framework opines on the true-and-fair view of financial statements; evidence is gathered to reasonable assurance under SA 200. Forensic audit is investigative, triggered by suspected fraud, with evidence gathered to legal-evidentiary standards under the Indian Evidence Act and is reportable to law enforcement or under SEBI / SFIO frameworks. Process audit sits between the two — it provides reasonable assurance on control design and operating effectiveness, with findings reported to management or the audit committee, and is recurring rather than incident-driven. The OECD International Standards on Auditing convergence work has progressively aligned ICAI SAs with ISA pronouncements, and SA 315 (revised 2021) brings the risk-assessment vocabulary close to the COSO 2013 framework that process audit applies.
A business process audit is a structured, evidence-based examination of one or more end-to-end business processes (revenue-to-cash, procure-to-pay, hire-to-retire, record-to-report, plant-and-asset, IT general controls) against a benchmark control framework — most commonly the COSO 2013 Internal Control Integrated Framework (5 components and 17 principles) and SA 315 risk-of-material-misstatement assessment used by statutory auditors. The Institute of Internal Auditors (IIA) International Professional Practices Framework defines internal auditing as an independent, objective assurance and consulting activity designed to add value and improve operations; a process audit is a tactical sub-set focused on individual process families rather than the enterprise-wide annual internal-audit plan. ICAI Standards on Internal Audit (SIA 110 to SIA 740) — mandatory from 1 April 2024 — codify the engagement framework: SIA 310 (planning), SIA 320 (evidence), SIA 330 (documentation), SIA 360 (communication), SIA 390 (monitoring) and SIA 740 (reporting). A process audit follows the same SIA discipline but with a narrower scope and faster cycle than the full annual internal audit.
The Control Environment component is the foundation — Principle 1 (commitment to integrity and ethical values), Principle 2 (board oversight independence), Principle 3 (management establishes structures, reporting lines and authorities), Principle 4 (commitment to attract, develop and retain competent individuals), and Principle 5 (holds individuals accountable for internal control responsibilities). In a process audit, the Control Environment is typically tested through a tone-at-the-top survey, board / audit-committee minutes review, code-of-conduct dissemination evidence, and HR competency framework. The Indian IFC framework picks up these principles via Schedule IV (Code for Independent Directors) and the SEBI Listing Obligations and Disclosure Requirements Regulations 2015 for listed entities; non-listed SMEs typically have an attenuated control environment, and the process audit's recommendations focus on closing this gap.
Risk Assessment under COSO 2013 — Principle 6 (specifies objectives with sufficient clarity), Principle 7 (identifies risks), Principle 8 (assesses fraud risk), Principle 9 (identifies and assesses changes that could significantly impact) — runs parallel to SA 315 (revised 2021) risk-of-material-misstatement assessment used in statutory audit. The convergence point is the inherent risk and control risk taxonomy: inherent risk is the susceptibility of an assertion or process to misstatement before considering controls; control risk is the risk that a misstatement could occur and not be prevented or detected on a timely basis by the internal control system. Process audit applies this taxonomy at the process-step level, producing a risk-heat-map that the audit committee uses to prioritise process redesigns and resource-allocation for remediation.
Control Activities — Principle 10 (selects and develops control activities), Principle 11 (selects and develops general control activities over technology), Principle 12 (deploys through policies and procedures) — is where process audit findings are most concrete. Control activities are categorised as preventive (e.g. segregation of duties, authorisation matrices) versus detective (e.g. reconciliations, exception reports), and as manual versus automated. The COSO 2013 Principle 11 explicitly carved out technology general controls (access management, change management, computer operations) as a distinct domain, reflecting the post-SOX experience that ITGCs are a foundational layer for application-level controls. ITIL v4 (service value system, change enablement, incident management) and ISO 27001:2022 Annex A controls provide the operational vocabulary at the ITGC layer; process audit cross-references these to COSO Principle 11.
COSO Enterprise Risk Management Integrated Framework was first issued in 2004 with 8 components, and updated in 2017 as Enterprise Risk Management — Integrating with Strategy and Performance with 5 components (Governance and Culture, Strategy and Objective-Setting, Performance, Review and Revision, Information Communication and Reporting) and 20 principles. The 2017 update repositioned ERM as a strategic discipline integrated with strategy-setting and performance management, rather than a parallel risk-management silo. A process audit can be conducted purely under the COSO 2013 Internal Control framework (process-control orientation) or extended under COSO ERM 2017 (risk-strategy orientation); the choice depends on the engagement objective and the SME's maturity. At entry-level SME process-audit work, COSO 2013 is the standard reference; at growth-stage and PE-backed SMEs, COSO ERM 2017 increasingly becomes the reference for the audit-committee charter.
Three major risk-management frameworks operate in parallel: COSO ERM 2017 (US-originated, principles-based, 5 components and 20 principles), ISO 31000:2018 Risk Management Guidelines (international standard, principle-process-framework triad, 8 principles), and the IIA 3-lines-of-defence model (governance-oriented, three roles: first-line operational, second-line risk-and-compliance oversight, third-line independent assurance). Process audit can draw on any of the three: COSO ERM 2017 is preferred where the audit-committee charter explicitly references it; ISO 31000:2018 is preferred where the SME is also pursuing ISO 9001 or ISO 27001 certification and wants a coherent ISO architecture; the IIA model is preferred where the audit-committee is structuring its third-line assurance function. The three are not mutually exclusive — many mature SMEs combine ISO 31000 process discipline with the IIA governance architecture and COSO 2013 control vocabulary.
Fraud risk is a particular sub-set of risk-assessment under both COSO ERM 2017 (Principle 12 — assesses risk in objective-setting context) and SA 240 (revised) — The Auditor's Responsibilities Relating to Fraud in an Audit of Financial Statements. The fraud-triangle (Donald Cressey, 1953) — pressure, opportunity, rationalisation — has been extended to a fraud-diamond (capability added) and a fraud-pentagon (arrogance added). Process audit applies these models at the process-step level — identifying which steps create opportunity for fraud (typically segregation-of-duties gaps), which positions create capability (typically privileged-access or master-data-maintenance roles), and which environments create pressure (typically aggressive sales-incentive structures). The output is a fraud-risk register that complements the COSO ERM principles assessment.
Mature SMEs increasingly pursue an Integrated Management System (IMS) — a single management-system architecture that satisfies multiple standards simultaneously. The Annex SL High-Level Structure adopted across ISO management standards (9001, 14001, 27001, 45001, 22301) makes IMS architecture practical; documents and processes can be shared across standards with minimal duplication. Process audit at an IMS-certified SME tests the integrated control set against COSO 2013 (financial-reporting orientation), COSO ERM 2017 (strategic-risk orientation), and the relevant ISO standards (quality, information-security, business-continuity orientations). The integration reduces audit fatigue and produces a coherent control narrative for the board and investors. The ICAI Background Material on Internal Audit in IMS-certified entities (2019) provides illustrative working-paper templates.
ISO 9001:2015 Quality Management Systems — Requirements is the most widely deployed international standard in SME manufacturing and services. The 2015 revision restructured the standard around the Annex SL High-Level Structure (10 clauses) and introduced two foundational concepts that align directly with process audit: clause 4.4 (the QMS and its processes — requiring the organisation to determine the inputs and outputs of each process and the criteria for control) and clause 6.1 (actions to address risks and opportunities — borrowing the ISO 31000 risk vocabulary). A process audit conducted in an ISO 9001-certified SME naturally reuses the documented process maps from the QMS as starting points; conversely, a non-certified SME often emerges from a process-audit engagement with the documentation foundation needed to pursue ISO 9001 certification within twelve months.
ISO 27001:2022 (the 2022 update, replacing the 2013 version) is the international ISMS standard, with 93 Annex A controls grouped into 4 themes (organisational, people, physical, technological). The 2022 update merged the 114 controls of the 2013 version into 93 and added 11 new controls reflecting cloud and threat-intelligence developments. Process audit at IT-heavy SMEs (SaaS, edtech, fintech, NBFC) increasingly cross-references ISO 27001 Annex A — A.5 organisational controls, A.6 people controls, A.7 physical controls, A.8 technological controls — as the operational vocabulary for ITGC findings. The Annex A.5.30 ICT readiness for business continuity overlaps with the BCP/DRP component of process audit; A.5.34 privacy and protection of PII overlaps with the Digital Personal Data Protection Act 2023 (India) compliance lens.
What Nolambur Phase 3 clients usually ask next: On the ground in Nolambur Phase 3, for the professional and salaried population of Nolambur Phase 3 navigating personal-tax and home-office GST.
Overall Equipment Effectiveness — composite metric of Availability × Performance × Quality. World-class benchmark is 85%. Below 60% indicates significant equipment-utilisation losses; process audit on manufacturing always includes OEE measurement.
The rate at which a system produces output per unit time. Throughput is constrained by the bottleneck step; increasing capacity at non-bottleneck steps does not increase throughput.
WIP — units that have entered the process but not yet completed it. High WIP indicates poor flow and is a symptom of upstream-downstream imbalance. Little's Law states WIP = Throughput × Lead Time.
Defects Per Million Opportunities — the Six Sigma measure of process quality. Translates defect rate into a sigma-level scale; 3.4 DPMO equals 6-sigma capability.
Statistical measure of process capability: 3σ ≈ 66,800 DPMO; 4σ ≈ 6,210 DPMO; 5σ ≈ 233 DPMO; 6σ ≈ 3.4 DPMO. Most Indian business processes operate around 3σ to 4σ.
Define-Measure-Analyse-Improve-Control — the five-phase Six Sigma project methodology used for process improvement. Each phase has specific tools and deliverables; audit reports often follow this structure.
Plan-Do-Check-Act — the Deming cycle of continuous improvement. Simpler than DMAIC and used for incremental process changes that do not justify a full Six Sigma project.
Responsibility Assignment Matrix — a tool that clarifies who is Responsible, Accountable, Consulted and Informed for each process step or deliverable. Resolves ownership ambiguity which is the most common process-audit finding.
A specific step in a process where a control activity is performed to prevent, detect or correct an error or risk. Process audits map controls to risks and test design effectiveness and operating effectiveness.
A preventive control stops an error from occurring (e.g. system validation blocking duplicate invoice). A detective control identifies an error after it has occurred (e.g. monthly exception report). Preventive controls are stronger but harder to design.
Key Performance Indicator — a quantifiable metric used to evaluate the performance of a process against its objectives. Good KPIs are SMART (Specific, Measurable, Achievable, Relevant, Time-bound) and tied to a process owner via RACI.
Service Level Agreement — a documented commitment on the performance level of a service or process step, typically in time or quality terms. Used both with external vendors and internally between process steps.
Numerical examples showing tax + interest + penalty across common default scenarios.
How Nolambur Phase 3 businesses typically avoid these: On the ground in Nolambur Phase 3, the cluster of residential, retail, coaching businesses that defines Nolambur Phase 3's commercial fabric; for the professional and salaried population of Nolambur Phase 3 navigating personal-tax and home-office GST.
How the local trade mix shapes this — Nolambur Phase 3 businesses operate where the cluster of residential, retail, coaching businesses that defines Nolambur Phase 3's commercial fabric.
Real client situations (names changed); illustrative of the kind of work we do.
Why these Nolambur Phase 3 engagements look the way they do: On the ground in Nolambur Phase 3, the business activity radiating outward from Nolambur Phase 3 Park and nearby commercial pockets; for the professional and salaried population of Nolambur Phase 3 navigating personal-tax and home-office GST.
“Engaged FilingPro for full enterprise process audit covering O2C, P2P, H2R and inventory cycles. CAAT testing on full 18 months of P2P data flagged 47 duplicate invoice payments and 12 vendor-employee bank-account matches — recovered ₹38 lakh. Findings prioritised by Pareto with ₹-quantified benefits. Audit Committee presentation was clean and action-tracked.”
“Section 134(5)(e) ICFR mapping was overdue for our listed company. FilingPro completed COSO 2013 5-component design assessment, walkthroughs and operating-effectiveness testing in 10 weeks. ICAI IFC Guidance Note 2015 methodology followed; significant deficiencies under SA 265 reported separately to Audit Committee. Statutory auditor's ICFR opinion under Section 143(3)(i) was unqualified.”
“Process audit revealed our P2P cycle was at CMMI Level 1 with multiple workarounds outside ERP. FilingPro recommended a Six Sigma DMAIC improvement plan — vendor master clean-up, three-way match enforcement, RACI re-design and SOD conflict resolution. Cycle moved to Level 3 in 9 months and invoice TAT dropped from 14 days to 5 days.”
“Our SaaS company falls under DPDP Act 2023 as a Significant Data Fiduciary. FilingPro's process audit covered consent-management workflow, data-principal-rights TAT, breach-notification process and CERT-In Section 70B 6-hour incident reporting. Gaps in log retention (180 days under CERT-In Directions 28 April 2022) were closed before the next compliance review.”
“BRSR Core readiness for our listed manufacturing company was the brief. FilingPro audited the data-collection process for each BRSR Core KPI — energy intensity, water consumption, GHG Scope 1/2/3, gender diversity. Process gaps fixed before reasonable-assurance season under SEBI's mandate for top 150 listed entities. Audit Committee was satisfied.”
“Our trading group with 4 branches across Tamil Nadu engaged FilingPro for multi-location process audit. SOD conflicts in branch-level ERP roles, cash-handling weaknesses and inventory cut-off issues were flagged. CAATs on 24 months of GL data using IDEA identified ₹26 lakh of off-period entries reversed for window-dressing. Closure tracked over two follow-up audits under SIA 390.”
Common questions from Nolambur Phase 3 clients. Call 9566-068-468 for specific queries.
From 1st Avenue, 2nd Main Road, JPC Main road, Nolambur Main road and Ramalingam saalai through to Venugopal Street, 1st Avenue, bus stand street, 200 Feet Bypass Road and Chennai Bypass Expressway, our team covers Process Audit for businesses right across Nolambur Phase 3 and its main commercial roads.
Professional Business Process Audit in Nolambur Phase 3, Chennai. Call @ 9566-068-468. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming). 15+ years experience, 4.9★ rated.
FilingPro Chennai — 15+ Years of Expert Tax & Business Consulting. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming), Chennai. Call @ 9566-068-468. Disclaimer: Information on this page is for general guidance only and does not constitute legal, financial or tax advice. Consult a qualified professional for specific advice.