Qualified Business Loan for Injambakkam (PIN 600115) and adjacent Palavakkam — with same-day acknowledgement delivery
Business Loan Project Report for Injambakkam firms under Chennai South (Velachery Division) — transparent scope, no surprises, and a filed acknowledgement back to you. Call 9566-068-468.
Sensitivity analysis stress-tests the financial projections by varying critical assumptions — typically (a) revenue down 10-15%, (b) variable cost up 5-10%, (c) interest rate up 100-200 bps, (d) capacity utilisation down 10-20% — and recomputing DSCR, IRR and Net Profit Margin in each scenario. Banks expect DSCR to remain ≥ 1.25 in the worst-case. Sensitivity is mandatory under the RBI Master Direction MSME 2017 for term loans above ₹2 crore.
Fixed fees · Zero hidden charges · Call 9566-068-468 for a custom quote.
Swipe to see all plans
Prices exclude GST. For enterprise pricing, call 9566-068-468.
Expert Business Loan in Injambakkam — qualified professionals, 15+ years experience, zero-penalty track record.
Stand-Up India 2016 framework leveraged for SC/ST and women entrepreneur greenfield projects. ₹10 lakh-₹1 crore loans, 18-month moratorium, 7-year repayment, CGFSI guarantee. Every SCB branch funds at least one SC/ST and one woman.
Project Report adapted to PSU, private, cooperative and NBFC credit policies; parallel applications yield 3-5 sanctions. Compared on 18 standard terms. Negotiated leverage saves Injambakkam borrowers 50-150 bps over 7-year tenure.
Revenue down 10-15%, variable cost up 5-10%, interest rate up 100-200 bps, capacity utilisation down 10-20%. Worst-case DSCR maintained ≥ 1.20. BEP at full repayment year held below 60% of installed capacity.
Project Reports and CMA Data signed by qualified CAs trained in RBI MSME Master Direction, the Sundaresan & Sons banking practice and ICAI's CMA-Data guidance — defensible at credit committee, not vendor-shop output.
Every Project Report follows the structure mandated by the RBI Master Direction on Lending to MSME Sector dated 24-07-2017 — executive summary, promoter, project, market, technical, financials, sensitivity, breakeven, conclusion. Injambakkam clients submit a document that ticks every credit-appraisal checkbox.
MPBF computed under Tandon Method I (75% of working capital gap), Method II (75% of current assets) and Nayak 20% turnover method side by side — borrower picks the optimal route. Method II is the standard PSU bank benchmark today.
Every Business Loan Project Report engagement delivers measurable, guaranteed outcomes — expert professionals, on time, every time.
Why this matters here — In Injambakkam, the cluster of hospitality, residential, real estate businesses that defines Injambakkam's commercial fabric; served by short connections to Palavakkam and Akkarai and onward to central Chennai.
Share documents via WhatsApp to 9566-068-468. No office visit required for Injambakkam clients.
Miss any of these and the next consequence kicks in automatically.
Deadlines in this neighbourhood — In Injambakkam, the business activity radiating outward from Injambakkam Beach and nearby commercial pockets.
Deadline pressure points we see in Injambakkam: Closer to Injambakkam, for Injambakkam IT-services firms managing export-LUT cycles alongside payroll and TDS.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Every claim on this page can be traced back to a section or rule below.
RBI Master Direction MSME Sector is the operative provision for business loan project report in this engagement. CMA Data Project Report bank-format projections for term loan working capital and CGTMSE collateral-free loans The taxpayer should ensure the procedural conditions under this section are met before any filing or submission. Failure to comply attracts the consequences separately prescribed under the penalty and interest provisions of the same Act.
Businesses registered in Injambakkam share the Chennai South jurisdiction, and their statutory matters route through the same Velachery Division each time. The 600xx geo-zone covering Injambakkam groups several locality clusters under common administration, keeping documentation expectations predictable. Statutory correspondence for Injambakkam businesses routes through the Velachery Division, so we align every Business Loan Project Report engagement to that jurisdiction from the start. For Business Loan Project Report at PIN 600115, understanding the Velachery Division's documentation norms removes most of the friction from the process.
Injambakkam reads as a coastal residential and beach hospitality pocket with medium commercial activity, anchored around Injambakkam Beach and fed by the Injambakkam Bus Stop corridor. Document pickup near Injambakkam Beach is a same-hour errand for our Injambakkam engagements rather than the half-day a typical Chennai client expects. Injambakkam sustains a medium flow of commerce for a coastal residential and beach hospitality locality, and that flow is the raw material for the Business Loan files we close here. Vendors and customers tied to the Injambakkam Bus Stop network show up across the invoice trail we reconcile for Injambakkam Business Loan Project Report clients.
real estate units around Injambakkam share recurring Business Loan patterns — input-credit timing, vendor reconciliation, and sector-specific documentation. Sector concentration matters: when Injambakkam leans toward real estate, the Business Loan risks cluster around the same few line items each cycle. A real estate operator in Injambakkam gets a Business Loan workflow shaped by sector norms, not a one-size-fits-all template. The real estate firms we serve in Injambakkam value a Business Loan partner who already understands their sector's compliance rhythm.
The Injambakkam Business Loan Project Report workflow is documented end-to-end: WhatsApp document intake, a working file, qualified review, and a filed acknowledgement back to you. A Injambakkam client sees the same Business Loan cadence each cycle: intake, reconciliation, review, filing, acknowledgement. The qualified-review step on every Injambakkam Business Loan file is where errors get caught before they reach the portal. We keep a repeatable Business Loan checklist for Injambakkam so nothing in the cycle is improvised or missed.
A client relocating between Injambakkam and Akkarai keeps the same Business Loan file and the same team. Serving Injambakkam and Akkarai from one team keeps Business Loan Project Report turnaround identical across the cluster. Proximity to Akkarai means a Injambakkam engagement can extend across the locality cluster with no change in cadence. From the same Injambakkam team we also serve Akkarai and other nearby localities without re-onboarding clients.
Over several cycles in Injambakkam, the recurring Business Loan Project Report issues cluster around a predictable short list we screen for early. The Business Loan Project Report mistakes we see most in Injambakkam are avoidable with disciplined intake, which our checklist enforces. Each engagement in Injambakkam adds to a record of what the Chennai South jurisdiction expects, sharpening the next Business Loan file. Common patterns in the Velachery Division give Injambakkam businesses an early-warning map we use to pre-empt Business Loan issues.
Relocating a registered office into Injambakkam (PIN 600115) changes the assessing division, and we handle that Business Loan Project Report transition cleanly. First-time Business Loan Project Report for a Injambakkam business is where getting the basics right saves years of cleanup later. For a new business incorporating in Injambakkam or shifting its principal place of business here, Business Loan Project Report setup is one of the first things to get right. We onboard new Injambakkam entities onto a Business Loan Project Report cadence that is audit-ready from the very first cycle.
Bank-format Project Report and CMA Data prepared in Injambakkam under the RBI Master Direction on Lending to MSME Sector 2017 and the Tandon Committee 1974 framework — 5-7 year financial projections, DSCR ≥ 1.50, MPBF computation, CGTMSE ₹5 crore coordination and multi-bank shopping for the best sanction terms.
A dedicated business loan consultant in Injambakkam structures the Project Report executive summary, market study, technical feasibility and financial projections; computes Debt Service Coverage Ratio, Maximum Permissible Bank Finance under Tandon Method II and current ratio benchmarks against bank credit policy.
Collateral-free credit guarantee under CGTMSE up to ₹5 crore (effective 09-03-2023), Pradhan Mantri Mudra Yojana across Shishu / Kishore / Tarun / Tarun Plus tiers and Stand-Up India ₹10 lakh-₹1 crore loans for SC/ST and women entrepreneurs structured for Injambakkam businesses.
Parallel application filing across scheduled commercial banks, cooperative banks, RRBs and NBFCs in Injambakkam; sanction letter comparison on rate of interest, tenure, processing fee, prepayment, collateral and CGTMSE coverage to achieve 50-150 bps cost saving.
CMA Data preparation typically takes 7-14 working days from receipt of complete data. Bank's credit-appraisal cycle after submission ranges from 30-60 days depending on facility size and complexity. CGTMSE-covered facilities may take an additional 15 days for guarantee invocation post-sanction.
Bank can flag projection-vs-actual variance as a covenant-breach issue requiring borrower explanation, but cannot recall the loan or invoke pre-payment penalty solely on projection variance unless the underlying CMA was fraudulent or wilfully misleading. Bonafide commercial variance is treated as ordinary business risk.
Our professional fee for CMA Data Project Report preparation is Rs.15,000 one-time per project, covering both term-loan project-report and working-capital CMA components, sensitivity analysis, ratio computations, and one round of revisions post-bank-feedback. Additional revisions or subsequent renewals are scoped separately.
Conventional MSME loans require collateral coverage of minimum 125% and standalone credit underwriting. CGTMSE-covered loans are collateral-free up to Rs.5 cr (Micro) or Rs.10 cr (Small) subject to guarantee fee of 0.37%-2%. CGTMSE-covered loans typically carry pricing 100-200 bps lower due to embedded guarantee comfort.
Innoventive Industries v ICICI Bank (SC 2017) restricts NCLT's inquiry to two questions: existence of financial debt and proof of default. Defence must address either: (a) the debt is non-financial, (b) no default has occurred (e.g., disputed appropriation), or (c) default is below the Rs.1 cr threshold under Section 4 IBC.
Bank-led Resolution Approach (BLRA) applies to single-lender or sub-threshold MSME exposures where the lead bank designs and executes restructuring without compulsory ICA. The Prudential Framework dated 07-06-2019 applies to multi-lender exposures above the prescribed threshold, requiring ICA signing and 75%-by-value lender approval for binding effect.
What Injambakkam clients want to know before signing: Closer to Injambakkam, in the coastal residential and beach hospitality micro-market of Injambakkam.
Reading this guide locally — In Injambakkam, around the Injambakkam Beach catchment of Injambakkam.
The RBI Master Direction on Loan System for Delivery of Bank Credit (consolidated April 2019, last amended 2024) regulates the structural composition of working-capital limits sanctioned by Scheduled Commercial Banks. The Direction provides that for borrowers with working-capital limits of ₹150 crore and above, a minimum of sixty per cent of the sanctioned fund-based limit must be in the form of Working Capital Demand Loan (WCDL) and only the residual forty per cent may be in cash credit, with the bifurcation reviewed annually. The bifurcation is intended to instil disciplined working-capital utilisation, addressing the Chore Committee 1979 finding that pure cash-credit financing led to indiscipline because borrowers treated the limit as a perpetual revolving facility with no compulsion to repay. The Loan System Direction also prescribes the loan-component-and-cash-credit-component framework for limits below ₹150 crore on a graduated basis.
Bank lending to MSMEs operates within the broader Basel III prudential framework as implemented by RBI through the Master Direction on Basel III Capital Regulations. Under the standardised approach, exposures to Micro and Small Enterprises classified as retail (aggregate exposure to a single counterparty below ₹7.5 crore and other granularity criteria satisfied) attract a risk-weight of seventy-five per cent, materially below the one-hundred-per-cent risk-weight applicable to corporate exposures. The lower risk-weight translates into a lower capital charge for the lender, which is one of the structural reasons why MSME lending is commercially attractive to banks even at concessional pricing. The framework also caters to credit-risk-mitigation through CGTMSE cover, which is recognised as an eligible guarantor for risk-weight reduction subject to the operational requirements set out in the Master Direction.
The principal regulatory instrument governing bank lending to MSMEs is the Reserve Bank of India's Master Direction on Lending to Micro, Small and Medium Enterprises, currently consolidated as RBI/FIDD/2017-18/56 and updated through successive amendments. The Master Direction operates under Sections 21 and 35A of the Banking Regulation Act 1949 and binds all Scheduled Commercial Banks, Regional Rural Banks, Small Finance Banks and All-India Financial Institutions. It codifies the substantive lending obligations and procedural protocols including time-bound credit appraisal, simplified documentation, transparent restructuring of stressed accounts, and the Code of Conduct for lenders dealing with MSE borrowers. The Master Direction is supplemented by the RBI Master Direction on Priority Sector Lending (RBI/2017-18/82) which classifies MSME credit as a sub-target within the broader priority-sector framework, with domestic banks required to deploy forty per cent of adjusted net bank credit to priority sectors and 7.5 per cent specifically to Micro enterprises.
CMA Form-III is the balance-sheet form capturing the borrower's asset-liability position across the assessment period, structured to facilitate the Tandon Method or Nayak Method working-capital computation. The form disaggregates current assets (inventory by type, receivables by ageing, cash and equivalents, other current assets) and current liabilities (sundry creditors, statutory dues, short-term borrowings, other current liabilities), with the working-capital gap and the maximum-permissible-bank-finance derived in the lower section. The form also captures non-current assets (gross block, depreciation, net block, capital-work-in-progress, investments), non-current liabilities (long-term borrowings, deferred-tax) and net-worth. Form-III is the analytical heart of the CMA package, and lender's credit-officer time is most heavily concentrated here.
CMA Form-IV is the ratio-analysis form capturing the key financial-ratio benchmarks against which the lender's credit-policy thresholds are tested. The form computes current ratio (target above 1.33 for manufacturing and 1.20 for services per Marathe Committee), debt-equity ratio (target below 2:1 for manufacturing and 3:1 for services), tangible-net-worth (TNW), debt-service-coverage ratio for term-loan assessment (target above 1.50), interest-coverage ratio (target above 2x), inventory-holding-period (industry-benchmark-driven), debtor-collection-period (industry-benchmark-driven), and creditor-payment-period. Each ratio is computed for the past three years (audited) and the projected next two or three years (estimated), with the lender's credit-officer reviewing the trend rather than the snapshot. Adverse trend on any single ratio is a yellow-flag and adverse trend on multiple ratios is typically a deal-breaker.
CMA Form-V is the funds-flow statement capturing the sources and applications of long-term and short-term funds across the assessment period. The form structurally distinguishes long-term sources (equity infusion, retained earnings, term-loan drawdown) from short-term sources (working-capital limit drawdown, trade-creditor expansion), and similarly distinguishes long-term applications (capital expenditure, term-loan repayment, dividend) from short-term applications (inventory build, receivables build, trade-creditor settlement). The form is the lender's check on the borrower's funds-deployment discipline — a borrower deploying short-term sources to long-term applications (working-capital limit being used for capital expenditure) is a serious yellow-flag and is the principal early-warning signal for the lender's working-capital monitoring framework.
The three methodologies — CMA, Tandon Method and Nayak Method — operate at different levels of analytical depth and apply to different borrower segments. The CMA framework is the universal documentation regime applicable to all borrowers with working-capital limits above the small-borrower threshold (typically ₹50 lakh). Within the CMA documentation, the Tandon Method (specifically Method-II) is the substantive working-capital-assessment methodology for borrowers with limits above ₹5 crore. The Nayak Method is the simplified assessment for MSE borrowers with limits up to ₹5 crore, requiring only a one-page turnover projection rather than the full five-form CMA package. The methodologies are not alternative — a Nayak-eligible borrower may elect to migrate to the full CMA-Tandon documentation for the additional analytic rigour, but Tandon-applicable borrowers cannot revert to Nayak.
The computational logic underlying the three methodologies reflects the trade-off between accuracy and simplicity. The Tandon Method-II derives the maximum permissible bank finance from a granular current-assets-and-current-liabilities computation: MPBF equals 75 per cent of current assets less other current liabilities, with the borrower contributing 25 per cent of current assets as margin. The method requires industry-specific inventory and receivables-holding norms, sensitive to seasonal and operating-cycle variations. The Nayak Method-by-contrast derives the limit ceiling from a turnover-projection alone: MPBF equals 20 per cent of projected annual turnover, with the borrower contributing 5 per cent of projected turnover as margin. The Nayak Method is administratively simpler but produces a less accurate figure for borrowers whose working-capital cycle deviates materially from the implied four-month-of-turnover assumption underlying the twenty-per-cent figure.
The documentation burden and the consequent sanction-cycle time differ materially across the three methodologies. A typical CMA-Tandon package comprises five forms running to thirty to forty pages, supplemented by audited financial statements for the past three years, the projected financials for the future two or three years, ratio-analysis schedules, working-capital-gap computation and an executive summary, requiring two to four weeks of borrower-side preparation and four to eight weeks of lender-side appraisal, for a total sanction-cycle of six to twelve weeks. A Nayak package is a single-page turnover projection supplemented by the past year's ITR, GST returns and Udyam Registration Certificate, requiring one to two days of borrower-side preparation and one to two weeks of lender-side appraisal, for a total sanction-cycle of two to three weeks. The choice is partially borrower-driven and partially limit-driven.
Beyond the standard CGTMSE cover, the Trust operates several sub-schemes calibrated to specialised borrower segments. The Hybrid Security Scheme allows the lender to combine collateral security with CGTMSE cover where the collateral value is below the loan amount, with CGTMSE covering the uncollateralised residual portion. The Sub-debt Scheme for stressed MSE provides credit-guarantee cover on quasi-equity infusion to stressed but operationally viable MSE units, enabling the promoter to inject sub-ordinated debt with bank-financing on a portion. The Credit Guarantee Scheme for Startups (CGSS) administered by the National Credit Guarantee Trustee Company provides cover for venture-debt and equity-linked instruments to DPIIT-recognised startups. The selection of the appropriate sub-scheme is project-report-driven and should be embedded in the CMA Form-I to ensure lender-side mapping.
The Credit Guarantee Fund Trust for Micro and Small Enterprises (CGTMSE) was established in August 2000 jointly by the Government of India and the Small Industries Development Bank of India (SIDBI) under the Ministry of MSME. The Trust operates under guidelines issued from time to time by its Board, with the principal scheme document being the CGTMSE Operational Guidelines as amended in 2023. The scheme provides credit-guarantee cover to participating Member Lending Institutions (Scheduled Commercial Banks, Regional Rural Banks, Small Finance Banks, eligible NBFCs and SFBs) in respect of loans extended without collateral or third-party guarantee to eligible Micro and Small Enterprises. The guarantee cover currently extends up to a per-borrower loan ceiling of ₹500 lakh (raised from the original ₹100 lakh ceiling in 2017 and subsequently extended), with higher ceilings available under specific sub-schemes.
CGTMSE provides differential cover percentages depending on the borrower category and loan size. For Micro Enterprises with credit facility up to ₹5 lakh, the cover is 85 per cent of the amount in default. For Micro and Small Enterprises with credit facility above ₹5 lakh and up to ₹500 lakh, the cover is 75 per cent of the amount in default. For women-led MSEs and units located in North-Eastern states (including Sikkim) and Union Territories of Jammu and Kashmir and Ladakh, the cover is 85 per cent uniformly. For MSE units owned by Scheduled Caste and Scheduled Tribe entrepreneurs, the cover is 85 per cent under the CGS-WMSE sub-scheme. The cover is computed on the amount-in-default at the time of NPA classification, net of any subsequent recoveries, and is invoked by the lender through the CGTMSE portal subject to compliance with the operational requirements.
What Injambakkam clients usually ask next: Closer to Injambakkam, for Injambakkam IT-services firms managing export-LUT cycles alongside payroll and TDS.
Credit Monitoring Arrangement Data — a standardised format prescribed by RBI for assessment of working capital and term loan proposals by banks. Comprises six statements covering existing and projected balance sheets, profit and loss, fund flow, ratio analysis, and assessment of working capital. Mandatory for credit limits above ₹2 crore in most banks.
Debt Service Coverage Ratio — computed as (Net Profit + Depreciation + Interest on Term Loan) divided by (Interest on Term Loan + Principal Repayment). Bankers target a minimum of 1.5 for sanction. Average DSCR over loan tenure is the key acceptance metric.
Interest Coverage Ratio — computed as EBIT divided by total interest expense. Bankers target a minimum of 3 for comfortable servicing. ICR below 2 signals stress; below 1.5 typically triggers EM-1 flagging.
Ratio of total long-term debt to tangible net worth. Bankers cap this at 2:1 for most sectors and 3:1 for infrastructure. Breach typically requires promoter capital infusion before sanction.
Ratio of current assets to current liabilities. Bankers target a minimum of 1.33 for working capital sanction. Below 1.17 the proposal is typically deferred for restructuring.
Total Outside Liabilities to Tangible Net Worth — measures leverage in totality including current liabilities. Bankers cap at 3:1 to 4:1 depending on sector. Trading entities typically permitted higher than manufacturing.
Computed as current assets less current liabilities (excluding bank borrowing). The gap is funded by margin money (promoter contribution) and bank borrowing. Used as the base for MPBF computation under Tandon Methods.
DP — the limit up to which a borrower can draw against a sanctioned working capital facility, computed monthly basis stock and debtor statement after applying prescribed margins. May be lower than sanctioned limit if collateral cover falls.
The borrower's own contribution to the asset financed — typically 25% to 35% for term loans depending on asset category and 25% on stock plus 35% on debtors for working capital. Must be from declared sources verifiable in CMA.
Charge created on movable assets (stock, debtors, machinery) where possession remains with the borrower but the bank holds a legal interest. Documented in deed of hypothecation and registered with CERSAI.
Term loan finances fixed assets with fixed tenure and EMI repayment. Cash credit (CC) is a revolving working capital limit secured against current assets. Working Capital Demand Loan (WCDL) is a short-tenure fixed-installment loan carved out of CC at lower interest, typically 7 to 180 days.
Credit Guarantee Fund Trust for Micro and Small Enterprises — provides credit guarantee coverage of 75% to 85% of the sanctioned amount (up to ₹5 crore) for collateral-free loans. Coverage application filed in Form 5 within 60 days of disbursement intent. Annual guarantee fee of 0.37% to 1.35% applies.
How the local trade mix shapes this — In Injambakkam, the cluster of hospitality, residential, real estate businesses that defines Injambakkam's commercial fabric.
Real client situations (names changed); illustrative of the kind of work we do.
Why these Injambakkam engagements look the way they do: Closer to Injambakkam, the cluster of hospitality, residential, real estate businesses that defines Injambakkam's commercial fabric, which is why for Injambakkam IT-services firms managing export-LUT cycles alongside payroll and TDS.
“FilingPro prepared the Project Report and CMA Data for our ₹3.5 crore term loan plus ₹2 crore CC limit. Tandon Method II MPBF, DSCR average 1.78 across 7 years, sensitivity stress-tested. Sanctioned by Indian Bank in 22 days flat. Clear explanation of every assumption to the credit officer.”
“As a women-led textile unit in Injambakkam we got 85% CGTMSE coverage on ₹2.4 crore loan — completely collateral-free. FilingPro structured the application after the 09-03-2023 ceiling enhancement and AGF was correctly computed at 0.74% on the women-concession rate. Saved us pledging the family property.”
“Multi-bank shopping was the differentiator — FilingPro got us four sanction letters (SBI, Canara, HDFC, Axis) for the same Project Report. Negotiated 80 bps off the SBI rate by showing the Axis offer. Disbursement coordination through to documentation was hand-held end-to-end. Worth every rupee of fee.”
“Stand-Up India loan for our greenfield organic processing unit — ₹65 lakh sanctioned with 18-month moratorium and 7-year repayment under CGFSI guarantee. FilingPro mapped the eligibility, prepared the project report in the standard Stand-Up India format and coordinated with the Bank of Baroda branch. Smooth process.”
“Took over our existing ₹4 crore loan from a cooperative bank to Federal Bank with 130 bps rate reduction. FilingPro re-prepared CMA in the new bank's format, obtained NOC, set up fresh charge and the takeover was completed without a day's interest break. EMI dropped by ₹38,000 a month.”
“Premium plan for our ₹28 crore plant expansion — 10-year projections, IRR 19.4%, NPV positive at 12% discount rate, technical feasibility from layout to capacity build-up, sensitivity tornado chart. SIDBI sanctioned with TIIC participation as consortium. Investment-grade documentation that the appraising banker complimented.”
Common questions from Injambakkam clients. Call 9566-068-468 for specific queries.
We serve businesses in every part of Injambakkam, from Sakthi Srinivasan Salai Main Road, Secretariat Colony Main Road, Subramanya Nagar Street Road, MNM Jain -architecture dept road and 10th Main Road to the 1st Avenue, East Coast Road, Bharathiyar Nagar Main Road and Blue Beach Road commercial pockets, with Business Loan handled end to end.
Professional Business Loan Project Report in Injambakkam, Chennai. Call @ 9566-068-468. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming). 15+ years experience, 4.9★ rated.
FilingPro Chennai — 15+ Years of Expert Tax & Business Consulting. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming), Chennai. Call @ 9566-068-468. Disclaimer: Information on this page is for general guidance only and does not constitute legal, financial or tax advice. Consult a qualified professional for specific advice.