Business Loan cadence for Chetpet firms near Chetpet MRTS — on fixed, transparent fees
Handling Business Loan Project Report for Chetpet and Kilpauk clients — transparent scope, no surprises, and a filed acknowledgement back to you. Call 9566-068-468.
The Tandon Committee Report (1974) prescribed three methods for assessing Maximum Permissible Bank Finance (MPBF). Method I — bank funds 75% of the working capital gap (current assets minus current liabilities other than bank borrowing), borrower funds 25% from long-term sources. Method II — borrower contributes minimum 25% of total current assets from long-term sources, bank funds the balance. Method III — borrower contributes 100% of core current assets plus 25% of balance current assets, bank funds the rest. Method II is the standard MPBF benchmark currently followed.
Fixed fees · Zero hidden charges · Call 9566-068-468 for a custom quote.
Swipe to see all plans
Prices exclude GST. For enterprise pricing, call 9566-068-468.
Expert Business Loan in Chetpet — qualified professionals, 15+ years experience, zero-penalty track record.
Project Report adapted to PSU, private, cooperative and NBFC credit policies; parallel applications yield 3-5 sanctions. Compared on 18 standard terms. Negotiated leverage saves Chetpet borrowers 50-150 bps over 7-year tenure.
Revenue down 10-15%, variable cost up 5-10%, interest rate up 100-200 bps, capacity utilisation down 10-20%. Worst-case DSCR maintained ≥ 1.20. BEP at full repayment year held below 60% of installed capacity.
Project Reports and CMA Data signed by qualified CAs trained in RBI MSME Master Direction, the Sundaresan & Sons banking practice and ICAI's CMA-Data guidance — defensible at credit committee, not vendor-shop output.
Every Project Report follows the structure mandated by the RBI Master Direction on Lending to MSME Sector dated 24-07-2017 — executive summary, promoter, project, market, technical, financials, sensitivity, breakeven, conclusion. Chetpet clients submit a document that ticks every credit-appraisal checkbox.
MPBF computed under Tandon Method I (75% of working capital gap), Method II (75% of current assets) and Nayak 20% turnover method side by side — borrower picks the optimal route. Method II is the standard PSU bank benchmark today.
Debt Service Coverage Ratio computed as (PAT + Depreciation + Interest) ÷ (Interest + Principal) for each tenure year. Average ≥ 1.50, year-1 ≥ 1.25 — non-negotiable benchmarks for Chetpet sanctions in PSU banks.
Every Business Loan Project Report engagement delivers measurable, guaranteed outcomes — expert professionals, on time, every time.
Why this matters here — In Chetpet, the cluster of education, healthcare, residential businesses that defines Chetpet's commercial fabric; served by short connections to Kilpauk and Nungambakkam and onward to central Chennai.
Share documents via WhatsApp to 9566-068-468. No office visit required for Chetpet clients.
Miss any of these and the next consequence kicks in automatically.
Deadlines in this neighbourhood — In Chetpet, the business activity radiating outward from Chennai Press Club and nearby commercial pockets.
Deadline pressure points we see in Chetpet: For Chetpet engagements specifically — for the professional and salaried population of Chetpet navigating personal-tax and home-office GST.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Statutory form prescribed for Business Loan Project Report engagements; carries the information set required for filing or submission to the prescribed authority.
Every claim on this page can be traced back to a section or rule below.
RBI Master Direction MSME Sector is the operative provision for business loan project report in this engagement. CMA Data Project Report bank-format projections for term loan working capital and CGTMSE collateral-free loans The taxpayer should ensure the procedural conditions under this section are met before any filing or submission. Failure to comply attracts the consequences separately prescribed under the penalty and interest provisions of the same Act.
Chetpet is a central-Chennai residential pocket with a strong education and healthcare focus, sitting between Egmore and Kilpauk. GST clients here are typically schools, clinics, professional service firms and small retail. Because PIN 600031 sits inside the Chennai North jurisdiction, the handling office for Chetpet stays consistent across years, which matters when filings or approvals span cycles. For Business Loan Project Report at PIN 600031, understanding the Anna Nagar Division's documentation norms removes most of the friction from the process. We keep a cycle-by-cycle record of how the Anna Nagar Division of the Chennai North handles Chetpet filings and approvals.
Document pickup near Anjugam Manimandapam is a same-hour errand for our Chetpet engagements rather than the half-day a typical Chennai client expects. Working in Chetpet brings a logistical edge: proximity to Anjugam Manimandapam and the Chetpet MRTS corridor keeps physical document handling fast. Chetpet reads as a education and residential with healthcare pocket with medium commercial activity, anchored around Anjugam Manimandapam and fed by the Chetpet MRTS corridor. Each Business Loan Project Report cycle for Chetpet reflects its commercial rhythm — invoices generated near Anjugam Manimandapam, expenses routed through the Chetpet MRTS freight network.
The education firms we serve in Chetpet value a Business Loan partner who already understands their sector's compliance rhythm. Because Chetpet hosts a cluster of education businesses, we benchmark each new Business Loan Project Report engagement against patterns we already track for the locality. education units around Chetpet share recurring Business Loan patterns — input-credit timing, vendor reconciliation, and sector-specific documentation. The education character of Chetpet commerce influences everything from invoice formats to the supporting documents a Business Loan Project Report review needs.
Our Chetpet Business Loan process is built to be predictable, documented, and on time, cycle after cycle. A Chetpet client sees the same Business Loan cadence each cycle: intake, reconciliation, review, filing, acknowledgement. The qualified-review step on every Chetpet Business Loan file is where errors get caught before they reach the portal. From the first Business Loan Project Report cycle, a Chetpet engagement is set up to be audit-ready rather than reconstructed under pressure later.
Group companies spread across Chetpet and Egmore consolidate their Business Loan under one engagement with us. From the same Chetpet team we also serve Egmore and other nearby localities without re-onboarding clients. We treat Chetpet and Egmore as one catchment for Business Loan Project Report, which keeps documentation and turnaround consistent. A client relocating between Chetpet and Egmore keeps the same Business Loan file and the same team.
Common patterns in the Anna Nagar Division give Chetpet businesses an early-warning map we use to pre-empt Business Loan issues. Patterns we track for Chetpet include government offices documentation gaps, timing mismatches, and the questions the Anna Nagar Division tends to raise. Over several cycles in Chetpet, the recurring Business Loan Project Report issues cluster around a predictable short list we screen for early. The Business Loan Project Report mistakes we see most in Chetpet are avoidable with disciplined intake, which our checklist enforces.
Relocating a registered office into Chetpet (PIN 600031) changes the assessing division, and we handle that Business Loan Project Report transition cleanly. New education ventures in Chetpet lean on us to stand up Business Loan Project Report correctly before the first deadline rather than after a notice. Incorporating in Chetpet comes with jurisdiction, registration and Business Loan steps that we sequence so nothing stalls the launch. When a Nungambakkam business expands into Chetpet, we extend its Business Loan setup to PIN 600031 without disruption.
Bank-format Project Report and CMA Data prepared in Chetpet under the RBI Master Direction on Lending to MSME Sector 2017 and the Tandon Committee 1974 framework — 5-7 year financial projections, DSCR ≥ 1.50, MPBF computation, CGTMSE ₹5 crore coordination and multi-bank shopping for the best sanction terms.
A dedicated business loan consultant in Chetpet structures the Project Report executive summary, market study, technical feasibility and financial projections; computes Debt Service Coverage Ratio, Maximum Permissible Bank Finance under Tandon Method II and current ratio benchmarks against bank credit policy.
Collateral-free credit guarantee under CGTMSE up to ₹5 crore (effective 09-03-2023), Pradhan Mantri Mudra Yojana across Shishu / Kishore / Tarun / Tarun Plus tiers and Stand-Up India ₹10 lakh-₹1 crore loans for SC/ST and women entrepreneurs structured for Chetpet businesses.
Parallel application filing across scheduled commercial banks, cooperative banks, RRBs and NBFCs in Chetpet; sanction letter comparison on rate of interest, tenure, processing fee, prepayment, collateral and CGTMSE coverage to achieve 50-150 bps cost saving.
Innoventive Industries v ICICI Bank (SC 2017) restricts NCLT's inquiry to two questions: existence of financial debt and proof of default. Defence must address either: (a) the debt is non-financial, (b) no default has occurred (e.g., disputed appropriation), or (c) default is below the Rs.1 cr threshold under Section 4 IBC.
Bank-led Resolution Approach (BLRA) applies to single-lender or sub-threshold MSME exposures where the lead bank designs and executes restructuring without compulsory ICA. The Prudential Framework dated 07-06-2019 applies to multi-lender exposures above the prescribed threshold, requiring ICA signing and 75%-by-value lender approval for binding effect.
A Techno-Economic Viability (TEV) study is an independent assessment of the borrower's technical and financial viability post-restructuring. It is mandatory under both the Prudential Framework and MSME OTR-2 for exposures above prescribed thresholds and supports the standard-asset-classification retention by demonstrating viable going-concern projections.
A CMA Data Project Report includes operating-statement projections, balance-sheet projections, fund-flow statement, MPBF computation per Tandon-Chore Methods I and II, ratio analysis with DSCR/current ratio/debt-equity, working-capital gap analysis, and break-even point, prepared per RBI Master Direction for MSME loan appraisal.
RBI Master Direction on MSME Sector benchmarks DSCR at minimum 1.5x annually and 1.25x average tenure-wise for term-loan exposures. DSCR below 1.5 signals repayment-capacity risk and forces the lender to demand additional collateral, equity infusion, or higher pricing under credit policy.
Term Loan appraisal requires a Detailed Project Report focused on capital-asset creation and DSCR-driven repayment matching. Working Capital appraisal uses CMA Data under the Tandon-Chore methodology for MPBF computation against operating cycle and current-asset financing, with current-ratio benchmark of 1.33.
What Chetpet clients want to know before signing: For Chetpet engagements specifically — around the Chennai Press Club catchment of Chetpet.
Reading this guide locally — In Chetpet, in the education and residential with healthcare micro-market of Chetpet.
The principal regulatory instrument governing bank lending to MSMEs is the Reserve Bank of India's Master Direction on Lending to Micro, Small and Medium Enterprises, currently consolidated as RBI/FIDD/2017-18/56 and updated through successive amendments. The Master Direction operates under Sections 21 and 35A of the Banking Regulation Act 1949 and binds all Scheduled Commercial Banks, Regional Rural Banks, Small Finance Banks and All-India Financial Institutions. It codifies the substantive lending obligations and procedural protocols including time-bound credit appraisal, simplified documentation, transparent restructuring of stressed accounts, and the Code of Conduct for lenders dealing with MSE borrowers. The Master Direction is supplemented by the RBI Master Direction on Priority Sector Lending (RBI/2017-18/82) which classifies MSME credit as a sub-target within the broader priority-sector framework, with domestic banks required to deploy forty per cent of adjusted net bank credit to priority sectors and 7.5 per cent specifically to Micro enterprises.
The Micro, Small and Medium Enterprises Development Act 2006 (MSMED Act) provides the substantive definitions and the enterprise-classification framework against which MSME lending is calibrated. Notification S.O. 1702(E) of 26-06-2020 issued under Sections 7 and 8 of the MSMED Act prescribes the composite investment-and-turnover criteria with the same thresholds for manufacturing and services: Micro (₹1 crore investment, ₹5 crore turnover), Small (₹10 crore, ₹50 crore) and Medium (₹50 crore, ₹250 crore). Notification S.O. 2119(E) of the same date provides the operational mechanic for annual automatic reclassification based on PAN and GSTIN-linked data integration. The Office Memorandum of 02-07-2021 extended Udyam Registration to retail and wholesale trade activity solely for the limited purpose of priority-sector lending classification under RBI/2017-18/82, with the broader MSE benefits remaining unavailable to trade-only Udyam holders.
The RBI Master Direction on Loan System for Delivery of Bank Credit (consolidated April 2019, last amended 2024) regulates the structural composition of working-capital limits sanctioned by Scheduled Commercial Banks. The Direction provides that for borrowers with working-capital limits of ₹150 crore and above, a minimum of sixty per cent of the sanctioned fund-based limit must be in the form of Working Capital Demand Loan (WCDL) and only the residual forty per cent may be in cash credit, with the bifurcation reviewed annually. The bifurcation is intended to instil disciplined working-capital utilisation, addressing the Chore Committee 1979 finding that pure cash-credit financing led to indiscipline because borrowers treated the limit as a perpetual revolving facility with no compulsion to repay. The Loan System Direction also prescribes the loan-component-and-cash-credit-component framework for limits below ₹150 crore on a graduated basis.
A fourth common error is inconsistent ratios across the CMA Forms, typically arising from inadequate quality-control on the final package — Form-IV ratios may not reconcile to the Form-II profit-and-loss and Form-III balance-sheet figures, or the Form-V funds-flow may not reconcile to the Form-III year-over-year balance-sheet changes. The lender's credit-officer routinely runs an arithmetic-consistency-check across the forms, and any unexplained discrepancy triggers a resubmission demand with consequent delay in the sanction cycle. The remediation is to draft the CMA package in an integrated spreadsheet model where each form is a tab linked to common-data tabs, with Form-IV ratios derived through formulas referring to Form-II and Form-III line-items rather than entered manually, so that any change in the underlying data automatically flows through to the ratios.
The most common error in MSE business-loan project reports is unrealistic revenue projection, typically with year-one revenue at three to five times the previous-year audited figure and double-digit annual growth rates extending through the loan tenor. Lenders' credit-officers are highly attuned to revenue-projection-realism and routinely benchmark the projection against industry-association published growth rates, the borrower's own historical track record, and the macroeconomic outlook. A revenue projection materially above the industry growth-rate plus the borrower's market-share-expansion realism is a yellow-flag and is typically discounted by the credit-officer through a downward revision in the lender-side appraisal model. The remediation is to anchor the revenue projection in independent market-research data and the borrower's own historical track record, with explicit reconciliation between past audited figures and future projected figures.
A second common error is inadequate working-capital provision in the project cost computation, typically by under-estimating the inventory-build cycle, the receivable-collection cycle, or the operating-cash-flow-stabilisation period during the project's gestation. The error produces a structural underfunding of the working capital, with the borrower experiencing cash-flow stress shortly after commercial production commences, often requiring an emergency ad-hoc top-up that the lender extends reluctantly and at a pricing premium. The remediation is to compute the working-capital provision under the Tandon Method or the Nayak Method, with the operating cycle disaggregated by component (inventory holding, receivable collection, payable cycle) and explicit margin for the gestation-period instability, and to seek the working-capital limit alongside the term-loan rather than after commercial production commences.
FilingPro Chennai's Business Loan Project Report and CMA Data engagement is priced at ₹15000 on a one-time engagement basis, covering the complete preparation of the project report, CMA Form-I through Form-V package, banker's-coordination support up to the in-principle approval stage, and one round of revision based on the banker's feedback. The pricing is inclusive of professional fee, software-platform cost (CMA-preparation software, financial-modelling templates) and incidental documentation, but exclusive of out-of-pocket expenses (CIBIL search cost, MCA-search cost, third-party-valuation cost where applicable). The fee is payable as 50 per cent advance at engagement commencement and 50 per cent on delivery of the final approved package, with the engagement-completion certificate issued after the borrower's confirmation of the deliverables.
The standard deliverables comprise: (a) the project report running to typically 40 to 60 pages, covering the executive summary, promoter background, market analysis, technical feasibility, financial projections and sensitivity analysis, security structure, risk analysis and mitigation, and project implementation schedule; (b) the CMA Form-I through Form-V package in editable Excel-and-PDF format, reconciled to the audited financial statements for past years and to the projected financial statements for future years; (c) supplementary schedules including the working-capital-gap computation, the DSCR-projection schedule, the ratio-trend-analysis schedule, and the assumptions-supporting schedule; (d) a one-page banker's-pitch summary suitable for first-meeting presentation; and (e) banker's-coordination support during the appraisal cycle up to the in-principle approval stage, typically involving two to four interaction touchpoints with the credit-officer.
The standard engagement excludes scope items that vary materially across borrower profiles and are best priced separately on a quotation basis. Excluded items include: (a) independent technical-consultant's report for technology-intensive projects, typically required by the lender's credit policy for projects above ₹5 crore involving non-standard technology; (b) independent valuer's report for collateral-security valuation, required for secured-loan proposals with immovable-property security; (c) chartered-accountant's certification for projected-financial-statements (where the lender's credit policy specifically requires CA-certified projections rather than borrower-prepared projections); (d) translation of the project report into vernacular language for state-level scheme applications; and (e) post-sanction documentation and disbursement-coordination support. Supplementary-service pricing is provided on quotation basis subject to the scope and complexity of the additional requirement.
The Chore Committee under the chairmanship of K.B. Chore submitted its report in 1979 and addressed the practical failures of the Tandon framework. The Committee found that the cash-credit system as implemented was producing indiscipline because borrowers were drawing the full limit irrespective of genuine working-capital need, treating the limit as a perpetual revolving facility. The Committee's principal recommendations were the introduction of the Working Capital Demand Loan (WCDL) for a portion of the working-capital limit (with a fixed tenor and structured repayment), tighter monitoring through quarterly information and operating-statement returns, and a graduated movement from Tandon Method-I to Method-II as the borrower's size and sophistication increased. The Chore framework laid the foundation for the present-day sixty-forty bifurcation between WCDL and CC under the RBI Master Direction on Loan System.
The Marathe Committee under the chairmanship of S.S. Marathe submitted its report in 1983 and addressed the limitations of the Tandon-Chore framework when applied to service-sector enterprises. The Committee found that the inventory-receivables-driven assessment was ill-suited to enterprises whose working-capital requirement was driven by salaries, lease rentals and overheads rather than physical inventory. The Marathe report recommended differentiated assessment norms for service enterprises including a higher debt-equity ratio tolerance (up to 3:1 for service enterprises compared to 2:1 for manufacturing), a flexible current-ratio benchmark (1.20 to 1.33 depending on activity), and a turnover-based simplified assessment for smaller service enterprises. The Marathe recommendations were partially implemented through subsequent RBI circulars and are reflected in the present-day Master Direction on MSME Lending service-enterprise norms.
The Nayak Committee under the chairmanship of P.R. Nayak submitted its report in 1992 and revolutionised the working-capital assessment for the SSI (now MSE) sector. The Committee found that the conventional Tandon-Chore methodology was administratively burdensome for small enterprises whose project-report-and-CMA-preparation costs often exceeded the benefit of bank credit. The Nayak Committee recommended a radically simplified turnover-based method for SSI working-capital assessment: twenty per cent of projected annual turnover (with five per cent of the projected turnover contributed by the borrower as margin) as the maximum permissible bank finance, applicable to limits up to ₹5 crore (originally ₹4 crore, raised in 2017). The Nayak Method requires the borrower to submit only a one-page projection rather than detailed CMA forms, and the bank's appraisal is correspondingly simplified. The method continues to apply today as the default for MSE working-capital assessment up to the prescribed ceiling.
What Chetpet clients usually ask next: For Chetpet engagements specifically — for the professional and salaried population of Chetpet navigating personal-tax and home-office GST.
Computed as current assets less current liabilities (excluding bank borrowing). The gap is funded by margin money (promoter contribution) and bank borrowing. Used as the base for MPBF computation under Tandon Methods.
DP — the limit up to which a borrower can draw against a sanctioned working capital facility, computed monthly basis stock and debtor statement after applying prescribed margins. May be lower than sanctioned limit if collateral cover falls.
The borrower's own contribution to the asset financed — typically 25% to 35% for term loans depending on asset category and 25% on stock plus 35% on debtors for working capital. Must be from declared sources verifiable in CMA.
Charge created on movable assets (stock, debtors, machinery) where possession remains with the borrower but the bank holds a legal interest. Documented in deed of hypothecation and registered with CERSAI.
Term loan finances fixed assets with fixed tenure and EMI repayment. Cash credit (CC) is a revolving working capital limit secured against current assets. Working Capital Demand Loan (WCDL) is a short-tenure fixed-installment loan carved out of CC at lower interest, typically 7 to 180 days.
Credit Guarantee Fund Trust for Micro and Small Enterprises — provides credit guarantee coverage of 75% to 85% of the sanctioned amount (up to ₹5 crore) for collateral-free loans. Coverage application filed in Form 5 within 60 days of disbursement intent. Annual guarantee fee of 0.37% to 1.35% applies.
Application form for CGTMSE coverage filed by the lending institution within 60 days of sanction. Captures borrower particulars, loan amount, asset details, and consent for premium deduction. Failure to file within the window forfeits coverage eligibility for that loan.
Statement issued by the existing lender to the takeover lender certifying outstanding balance, account conduct, security particulars, and no-dues subject to settlement. Mandated by RBI circular on transfer of borrowal accounts. Typical issuance window is 21 days from request.
Maximum Permissible Bank Finance — the ceiling on working capital bank borrowing, computed under Tandon Methods. Method I: 75% of working capital gap. Method II: 75% of current assets less current liabilities. Method III: current assets less core current assets less current liabilities. Most banks apply Method II.
Three methods of MPBF computation recommended by the Tandon Committee 1975. Method I assumes 25% of working capital gap funded by margin. Method II assumes 25% of current assets funded by margin (stricter). Method III excludes core current assets from financing. Banks typically apply Method II for limits above ₹2 crore.
Section 180(1)(c) of the Companies Act 2013 requires a special resolution of the members where the borrowing (excluding temporary loans from bankers in the ordinary course) exceeds the aggregate of paid-up capital, free reserves, and securities premium. Resolution must be filed in MGT-14 within 30 days.
Sensitivity analysis of CMA projection under adverse scenarios — typically revenue down 15%, interest up 100 bps, raw material up 10%. Bankers expect DSCR to remain above 1.2 under stress and current ratio above 1.17. Honest stress test is more credible than optimistic single-scenario projection.
How the local trade mix shapes this — In Chetpet, the cluster of education, healthcare, residential businesses that defines Chetpet's commercial fabric.
Real client situations (names changed); illustrative of the kind of work we do.
Why these Chetpet engagements look the way they do: For Chetpet engagements specifically — the business activity radiating outward from Chennai Press Club and nearby commercial pockets; for the professional and salaried population of Chetpet navigating personal-tax and home-office GST.
“FilingPro prepared the Project Report and CMA Data for our ₹3.5 crore term loan plus ₹2 crore CC limit. Tandon Method II MPBF, DSCR average 1.78 across 7 years, sensitivity stress-tested. Sanctioned by Indian Bank in 22 days flat. Clear explanation of every assumption to the credit officer.”
“As a women-led textile unit in Chetpet we got 85% CGTMSE coverage on ₹2.4 crore loan — completely collateral-free. FilingPro structured the application after the 09-03-2023 ceiling enhancement and AGF was correctly computed at 0.74% on the women-concession rate. Saved us pledging the family property.”
“Multi-bank shopping was the differentiator — FilingPro got us four sanction letters (SBI, Canara, HDFC, Axis) for the same Project Report. Negotiated 80 bps off the SBI rate by showing the Axis offer. Disbursement coordination through to documentation was hand-held end-to-end. Worth every rupee of fee.”
“Stand-Up India loan for our greenfield organic processing unit — ₹65 lakh sanctioned with 18-month moratorium and 7-year repayment under CGFSI guarantee. FilingPro mapped the eligibility, prepared the project report in the standard Stand-Up India format and coordinated with the Bank of Baroda branch. Smooth process.”
“Took over our existing ₹4 crore loan from a cooperative bank to Federal Bank with 130 bps rate reduction. FilingPro re-prepared CMA in the new bank's format, obtained NOC, set up fresh charge and the takeover was completed without a day's interest break. EMI dropped by ₹38,000 a month.”
“Premium plan for our ₹28 crore plant expansion — 10-year projections, IRR 19.4%, NPV positive at 12% discount rate, technical feasibility from layout to capacity build-up, sensitivity tornado chart. SIDBI sanctioned with TIIC participation as consortium. Investment-grade documentation that the appraising banker complimented.”
Common questions from Chetpet clients. Call 9566-068-468 for specific queries.
From Haddows Road, Mc Nichols Road, McNichols Road, Munro Bridge and Sterling Road through to Uttamar Gandhi Salai, Valluvar Kottam High Road, Mayor Ramanathan Road (Spur Tank Road) and Barnaby Road, our team covers Business Loan for businesses right across Chetpet and its main commercial roads.
Professional Business Loan Project Report in Chetpet, Chennai. Call @ 9566-068-468. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming). 15+ years experience, 4.9★ rated.
FilingPro Chennai — 15+ Years of Expert Tax & Business Consulting. Offices at Maduravoyal, Nerkundram & Nolambur (upcoming), Chennai. Call @ 9566-068-468. Disclaimer: Information on this page is for general guidance only and does not constitute legal, financial or tax advice. Consult a qualified professional for specific advice.